Tip<\/strong>: Always order at least 10% more fabric than you need when going for an unpatterned one. You also want to order more if you’re using patterns that match.<\/p>\n\n\n\nStep Four: Remove the Cushions from the Bench<\/h2>\n\n\n\n
Take the cushions out of your seats. Then, measure their length and width to serve as the basis for the board\u2019s dimensions. Remember to measure all cushions because the top and bottom items may not have equal sizes.<\/p>\n\n\n\n
After measuring, remove the upholstery fabric or seat covers with a pair of scissors. You can tear the material apart because there\u2019s no need to trace it for the template.<\/p>\n\n\n\n
Step Five: Cut the Board<\/h2>\n\n\n\n
Using a saw, cut the hardboard one inch shorter than the foam to make it easier to wrap with fabric. It will also make the board invisible from the foam. And you won\u2019t feel it on the cushion\u2019s soft side. <\/p>\n\n\n\n
But you don\u2019t need to snip it short if your cloth is already big enough. Just make sure it fits the frame of your camper seats. <\/p>\n\n\n\n
Step Six: Staple the Fabric<\/h2>\n\n\n\n
A heavy-duty staple gun is essential when you\u2019re learning how to reupholster camper cushions. A regular stapler won\u2019t perform well on the white hardboard.<\/p>\n\n\n\n
Start by laying the cloth on a flat surface, such as a big table or the ground. The opposite side must be showing so that the right side is facing down. <\/p>\n\n\n\n
Then, put your foam cushion in the center of the fabric. Sandwich it between the cloth and the hardboard on top. An optional step is to coat the cushion with spray adhesive to stick to the hardboard.<\/p>\n\n\n\n
Staple the fabric on the longer sides of the hardboard first. The staples should be one inch from the wooden backing\u2019s edge. Then, proceed to the shorter side, leaving the four corners unstapled. <\/p>\n\n\n\n
Try aligning the staples with the cushion\u2019s edge to look neat. Keep pulling tight so that the fabric fits perfectly on the cushion. <\/p>\n\n\n\n
Step Seven: Secure the Corners<\/h2>\n\n\n\n
Don\u2019t just fold the excess fabric on the corner. Keep it angular and single-creased by flattening one side of the fabric parallel to the cushion. Then, fold the extra material and staple it twice to three times. <\/p>\n\n\n\n
Fold the fabric on the other edge of the corner, this time tucking the excess fabric inside. You may use scissors if the extra fabric is too big. <\/p>\n\n\n\n
The fold on both sides should be parallel to the edge of the cushion for a straight crease. Staple two to three times again. Repeat on the other corners. <\/p>\n\n\n\n
Step Eight: Place the Cushions on the Bench<\/h2>\n\n\n\n
Slide your cushions into the frame, and you\u2019re done! You can try using seat covers to protect the upholstery fabric or leave them as is.<\/p>\n\n\n\n
How to Reupholster Camper Cushions: Make Them Look New!<\/h2>\n\n\n\n
Learning how to reupholster camper cushions is not a daunting task after all! In less than a day, you can elevate your vehicle’s style without the need for a sewing machine.<\/p>\n\n\n\n
Have you tried giving your camper cushions a makeover using this method? Share your personal tips and insights in the comments below!<\/p>\n\n\n\n